Download or read book Analysis of Exhaust Waste Heat Recovery Techniques from Stationary Power Generation Engines Using Organic Rankine Cycles written by Devin Krishna Sham and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Strict emissions legislation and energy security debates have spurred extensive research in alternative fuels and renewable energies. Literature research has shown the need for improvements in internal combustion engines (ICE) due to their low efficiencies. Significant gains in efficiency can be accomplished with the use of waste heat recovery (WHR) techniques. Organic rankine cycles (ORC) with turbocompounding harness the waste heat from an ICE to improve efficiency and fuel economy while reducing brake-specific emissions. A mathematical model was developed to explore the potential gains in 1st and 2nd law efficiencies. The model approaches the evaluations of the ORC from a practical and a theoretical method. The practical method in evaluation 1 limits the outlet exhaust gas temperatures from the evaporator to prevent the formation of condensation. The performance of the ORC is then evaluated and compared to the evaluation 2. In the theoretical method, in evaluation 2, the effect of pinch point on the evaporator and the entire cycle was analyzed. This analysis was conducted for R113, a dry fluid, and propane, a wet fluid, in order to analyze the differences in the two types of fluids. R113 showed a 13% -- 22% and a 6% -- 14.7% increase in 1st and 2nd law efficiencies, respectively. Propane showed a 9% -- 17.4% and a 2% -- 8.5% increase in 1st and 2nd law efficiencies, respectively. It was also shown that as the pinch point temperature decreases the 2nd law efficiencies increased. It was concluded that use of ORC with turbocompounding is an effective method for waste heat recovery in order to increase ICE efficiency.